Ecofasten Chatter Page Title

Solar eBoS Accessories:
Safety & Functionality Depend on Them

When it comes to rooftop solar, there’s a lot more to it than solar modules and the sun. The electrical components needed for a successful installation, for example, are so important that a solar array won’t work without them.

So, what are Electrical Balance of System (eBoS) accessories? eBoS are all those components that must be used to carry electric current from the modules all the way to the grid.

There are lots of aspects to think about when installing a rooftop solar array. How dependable the eBoS accessories you’re using is one of those aspects. Some of these accessories include components designed to manage the wiring used on the installation, while others are needed for things like bonding and conduit management. The efficiency of the modules plays just as important a role as the durability and dependability of the rooftop solar mounting system used.

At EcoFasten, our product portfolio includes rooftop solar mounting systems, solar roof attachments, AND eBoS accessories. Our electrical accessories are designed to work with our systems and attachments, for use in managing wires, bonding arrays, and running conduit. Below is a brief overview of each of these accessories, so sit back, relax, and get yourself acquainted.

And our first category is…

 

Looking for a universal wire clip that can be used with all systems? You just found it.

Our Frame Wire Management Clip mounts directly to the module frame, holding not only the PV cables but the Q cables and string cables, as well. This little clip has a big job, and it does its job well.

A solid, secure wire clip is crucial for accommodating PV wires. One that clips onto the top of the rail and responds to tension, so pulling the wires through is a cinch. Our Stainless Steel ClickFit Wire Clip does all that while accommodating 1-3 PV wires or 1 Q cable and 1-2 PV wires. Because the wire can run in any direction on the roof, the clip has the unique ability to be installed on both the north and the south side of each rail, giving you what you need for optimum wire management.

Properly attaching and securing Module Level Power Electronics (MLPEs) is essential, and the ClickFit MLPE Mount does just that – attaches and secures the MLPE to the top of the rail. The MLPE Mount is designed for use with our rail-based ClickFit system and can be placed anywhere along the rails for a fast and easy install. The ClickFit MLPE Mount can also be used to attach a junction box to the rail.

The Frame MLPE Mount has three significant roles: Attaching, mounting, and fully bonding Module Level Power Electronics to the frame of the module using only a single-bolt clip. The Frame MLPE Mount is compatible with any racking system and is the ideal solution for rail-less racking systems like our installer-favorite Rock-It.

Bonding rows together N-S (ClickFit) or East-West (RibFit), the Module Jumper slides securely onto the frame of the module. You’ve come to expect speed and ease when using EcoFasten products, and the Module Jumper provides just that, as well as conforming to UL 2703; And that’s not even the icing on the cake: You only need one Module Jumper per row or column of modules, saving time and money.

Acting as a standoff as well as a base plate, our J-Box Comp Bracket is compatible with all junction boxes. By combining the bracket with our GF-1 Flashing, the junction box is raised off the roof, which enables matching the height of various conduit supports. This simple, sophisticated bracket can be mounted directly to the deck.

It’s extremely important to raise electrical conduit up and off the roof. Conduit Mount Comp is an elevated bracket that does just that, preventing wiring from overheating. This innovative bracket can be oriented 360° to run conduit in any direction. Enter that essential GF-1 Flashing again, which makes it possible to install right into the rafter or direct-to-deck.

This mount is designed for use on comp shingle roofs (hence the name) and incorporates EcoFasten’s patented watertight technology! A bracket specifically for metal roofs is also available and uses our SimpleSeal bushing, which compresses to create a completely watertight seal.

Here’s our Conduit Mount Comp “See How It Works” video:
https://www.youtube.com/watch?v=lvk8ImHrgC4

 

As with the Conduit Mount Comp, our Conduit Mount Tile bracket lifts electrical conduit off tile roofs to prevent overheating of wiring. Compatible with all Flat, S, and W-shaped tile profiles out there (yay!), the mount installs in seconds. Another benefit? You won’t need to deal with any grinding or cutting of tiles, which creates a level of safety for installers since there won’t be any silica dust to worry about or contend with.

Here’s the video for the Conduit Mount Tile:
https://www.youtube.com/watch?v=HzE89oas2Rs

To bring it full circle, our eBoS accessories are designed for safety, and compatibility with our systems and attachments – visit the dedicated eBoS page on our website, where you can view our downloadable brochure and installation manuals, and can learn more about eBoS and the accessories we designed for you, the installer.

EcoFasten, an Enstall Company, has established a reputation for being one of the industry’s leading innovators by providing expert solutions for mounting solar PV on any roof. EcoFasten’s broad portfolio of solar rooftop mounting systems and attachments stems from the direct needs of solar PV installers. EcoFasten takes pride in providing the right solution for every application.

ecofastensolar.com

[email protected]

[email protected]

877.859.3947

Follow us on social media!

 

 

 nstall

Share this Story

Get Our Latest

Stay in the Know

Don’t miss the latest and greatest from your favorite racking & mounting provider!

Never miss industry & product news, events, and product launches.

Follow EcoFasten on Social Media!