Request A
Sample
Want to receive a free sample of our flat and low-slope roof attachments?
Request A
Metal Roof Attachments
No matter the type of metal roof, EcoFasten delivers a mounting solution. Discover our solutions for regular metal roofs, corrugated and standing seam roofs. With EcoFasten, installers get maximum flexibility in the way they install their solar panels.
SimpleSeal system
the system that fits on almost every metal roof
The SimpleSeal system was designed for installation on most roofs. SimpleSeal is a cone-shaped EPDM bushing that fits into the countersink of any EcoFasten compression bracket. When fastened to the roof, engaging a purlin or rafter, the SimpleSeal bushing is compressed inside the bracket, creating a watertight seal.
Corruslide
corrugated metal roofs
The universal CorruSlide provides a unique solution for mounting solar panels on corrugated metal roofs. Thanks to its versatile design, CorruSlide functions as a hinge to fit all profiles. Because CorruSlide is attached to the sides of the panel ribs, water can flow freely through the valleys of the corrugated metal roof. The system has a watertight fabrication, thanks to the pre-applied gasket tape and five fastener points with self-tapping sheet metal screws and sealing EPDM washers.
SimpleBlock & SimpleBlock PV
Metal standing seam roofs
SimpleBlock & SimpleBlock PV provide the redesigned standard for standing seam metal roofs. The system is available in a rail-based (SimpleBlock) and rail-free (SimpleBlock PV) variant. The two oval-point set screws are pre-installed, saving you a lot of time, lost parts and frustration. Thanks to the “T” slot on the top of the bracket, both systems offer easy adjustability.
ASG-U
Standing seam clamp
The EcoFasten ASG-U clamps guarantee a fast, non-penetrating way to attach just about anything to metal standing seam roofs. The clamps are available in configurations for both vertical and horizontal standing seams.
SimSupport Bracket
Our SimSupport bracket utilizes two of our patented watertight SimpleSeal bushings, along with two 5/16-in. lag bolts.
Bracket Options
The EcoFasten difference is the countersink milled on the underside of every bracket. This creates a patented watertight seal when paired with one of our solar mounting systems. Each mounting solution can be paired with a variety of compression brackets for your ideal installation. Our L-102 and SCL-101 brackets allow for height adjustability and CompSlide can be positioned within a 360° radius, allowing for north-south and east-west orientation. The L-102 bracket allows for maximum air flow beneath a solar arrayand the Z-101 bracket facilitates the installation with vertical attachment points.
SCL-101-3
SCL-101-3 (black)
RockIt Slide
RockIt Slide (black)
CP-SQ-Slotted
SimpleBlock PV Coupling
Compslide
L-102-3
L-102-6
Z-101
Conduit Mount Bracket
RockIt Inverter Clip
From free consultation to successful installation
Free Consultation
Calculate Project
Fast Delivery
Quick and Easy Installation
Frequently Asked Questions
